Fiberglass Roof Trims

 

 

 

 

 

Fiberglass GRP Roofing Trims

Essential for a professional neat finish to any roof, although the trims are nearly identical from supplier to supplier quality does vary a little even for exactly the same trim. You may find this alone sway’s you toward buying from a particular fiberglass supplier.

When giving sizes or dimensions of GRP trims below, the top mating surface of a trim that’s either nailed or glued with PU adhesive to the decking, will be referred to as the flange.

Fiberglass GRP Drip trims

Used to direct water from the flat roof at the lowest point into guttering or an outlet, also used around bay window roofs as a drip in some circumstances.

Click Information Icon to see plan details of how to fit this trim or click any of the pictures below to see the measurements and profile of that trim.

 

A170 drip trim – The smallest size of the dedicated drip trims the dimensions are : Length 3m – Drop 65mm – Flange > 80mm – Curl 10mm

 

A200 drip trim – The mid size of the drip trims the sizes are : Length 3m – Drop 90mm – Flange > 80mm – Curl 10mm

 

A250 drip trim – the largest of the drip trims the dimensions are : Length 3m – Drop 140mm – Flange > 80mm – Curl 10mm

 

AT195 EX – Although not technically a drip trim it lends itself to situations like that of simulating lead bay drips, size as follows : Length 3m – Drop 70mm – Flange > 100mm

 

Fiberglass GRP Raised Edge Trims

The raised edges are used to keep water on the roof and direct it towards the lowest point, normally an outlet or drip.

Click information Icon to see plan details of how to fit this trim or click any of the pictures below to see the measurements and profile of that trim.

 

B230 raised edge trim – The smallest of the dedicated raised edge trims the dimensions are : Length 3m – Visible face 105mm – Flange > 100mm – Curl 10mm

 

B260 raised edge trim – The mid size raised edge trim, the sizes are : Length 3m – Visible face 125mm – Flange > 100mm – Curl 10mm

 

B300 raised edge trim –  The largest of the raised edge trims, the dimensions are : Length 3m – Visible face 175mm – Flange > 100mm – Curl 15mm

 

GRP Wall Fillets and Up Stands

Wall fillets or upstands are a way of creating a waterproof return to an abutting wall, walls or fascia. The D260 is a dedicated example of this and is normally used to hide the recommended 25mm gap left between the roof deck and brickwork.

Click information Icon to see plan details of how to fit this trim or click any of the pictures below to see the measurements and profile of that trim.

 

D260 Wall fillet – The dimensions are : Length 3m – Height 150mm – Width 120mm. Can also be paired with the C3 corners below.

 

C3 External and C3 Internal Pre formed corners – These provide greater strength when going around corners and avoid the need to create mitre joints. Made for the D260 wall fillet.

AT195 INT – The AT195 internal trim is also very good at creating an upstand against walls as it has a very slight obtuse angle and can easily hide an 10mm gap behind it if needed.

Internal and External GRP Roof Trims

The AT195 Internal and External fiberglass trims can be very useful for many roofing jobs like, drip trims, upstands, lining internal box gutters, providing small expansion gaps and returns for abutting walls. The AT195 Int and Ext can vary in quality from different suppliers.

Click information Icon to see plan details of how to fit this trim or click any of the pictures below to see the measurements and profile of that trim.

 

AT195 INT angle trim – Slight Obtuse angle – Size 70mm by > 100mm

 

AT195 EX angle trim – Slight Acute angle – Size 70mm by > 100mm

 

GRP Flat flashing’s

Many uses such as Slipping underneath slates or tiles where stripping may not be easy, sliding underneath air conditioning units without removal, gutter lining or continuous flashings under the junction between pitched roof and flat roof etc.

Click information Icon to see plan details of how to fit this trim or click any of the pictures below to see the measurements and profile of that trim.

 

F300 flat flashing – Sizes are : Width 300mm and sold by the meter up to 20m Long

F600 flat flashing – Size : Width 600mm sold by the meter up to 20m

 

GRP fiberglass Soffit Trims Edge Trim

Used for capping or encapsulating situations like the edge of a flat concrete roof for example.

Click information Icon to see plan details of how to fit this trim or click any of the pictures below to see the measurements and profile of that trim.

 

S500 Soffit trim – The dimensions are : Length 3m – Visible face 200mm – Flange 90mm – Bottom return 80mm

 

GRP Corners and Trims

Used to provide a sturdy backbone to roofing trims at corners and returns.

C2 Fillet trim – Available left and right handed and compatible with A200 B260 and D260

Upstand Height 120/140mm

C1 and C4 moulding – Available in both Internal and External profiles for A200 and B260 trims

 

GRP Simulated Lead Flashings

Fiberglass flashings are a fast and cheap alternative to lead, bonded into place with PU adhesive with 150mm ( 6″ ) overlaps.

Click information Icon to see plan details of how to fit this trim or click any of the pictures below to see the measurements and profile of that trim.

 

C100 and C150 simulated lead flashing – Length 3m and Depth 100 and 150mm – Wall ( chase ) penetration 35mm

 

GRP Gutter Trim and Expansion Joint

Used to form a gutter or trough, sometimes in a roof or used as an expansion joint in a roof that is in excess of 50m². The E280 raised ridge roll can also be used for expansion if needed.

Click information Icon to see plan details of how to fit this trim or click any of the pictures below to see the measurements and profile of that trim.

 

G180 Gutter trim / Expansion joint – The dimensions are : Length 3m – Flanges 30mm – Trough depth 15mm – Gutter width 80mm – Overall width 160mm

 

GRP fiberglass Mopstick Roll and Raised Edge Roll

The E280 and raised ridge roll and E35/40 simulated roll are used to give the appearance of a lead mop stick and to provide expansion points. 3 meter lengths.

Click either information Icon to see plan details of how to fit this trim or click the pictures below for measurements.

 

E280 – sizes are : Flanges 90mm – Roll height 50mm ( also compatible with C5 roof ridge closure) – E35/40 Sizes : Flanges 20mm – Roll height 40mm – Roll width 35mm ( also compatible with C6 )

 

GRP fiberglass Rolled Rid Closures

The C5 and C6 rolled rib roof closures, used to close the ends of the E280 and E35/40 trims and give the dressed lead appearance of a mopstick.

C5 – compatible with E280

C6 – Compatible E35/40

 

For low cost high quality fibreglass roofing materials – East Coast Fibre Glass Supplies

Also see…

• How to Mix Resin and Topcoat
• How to Fibreglass a Bay Roof
• How to Lay the Fiberglass Laminate
• How to Fibreglass a Roof
• Fibreglass Problems and FAQ’s